smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7(64)-sp1] (sf-5.43-1) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: Hitachi HTS727550A9E364 Serial Number: J3300080G6L4MB LU WWN Device Id: 5 000cca 688c2fe5b Firmware Version: JF3OA0E0 User Capacity: 500 107 862 016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Wed Feb 08 16:52:15 2017 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 109) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 089 085 062 Pre-fail Always - 4718592 2 Throughput_Performance 0x0025 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0023 198 100 033 Pre-fail Always - 2 4 Start_Stop_Count 0x0032 096 096 000 Old_age Always - 7300 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 728 (0 89) 7 Seek_Error_Rate 0x002f 100 099 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 9559 10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 7259 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 192819496812544 188 Command_Timeout 0x0032 100 092 000 Old_age Always - 98807710695 190 Airflow_Temperature_Cel 0x0022 062 049 045 Old_age Always - 38 (Min/Max 19/38) 191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 107148 192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 15073510 193 Load_Cycle_Count 0x0032 093 093 000 Old_age Always - 72126 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 96 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 8 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 0 223 Load_Retry_Count 0x002a 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 15300 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 15300 occurred at disk power-on lifetime: 9557 hours (398 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 08 60 4a 48 00 Error: UNC at LBA = 0x00484a60 = 4737632 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 08 38 50 00 1a 40 00 00:15:29.413 READ FPDMA QUEUED 60 08 30 48 5e 66 40 00 00:15:28.434 READ FPDMA QUEUED 60 20 28 90 4d 66 40 00 00:15:28.424 READ FPDMA QUEUED 61 08 20 f8 2c 62 40 00 00:15:28.324 WRITE FPDMA QUEUED 61 08 18 08 2d 62 40 00 00:15:28.324 WRITE FPDMA QUEUED Error 15299 occurred at disk power-on lifetime: 9557 hours (398 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 08 60 4a 48 00 Error: UNC at LBA = 0x00484a60 = 4737632 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 20 28 b4 81 fe 40 00 00:15:25.775 READ FPDMA QUEUED 60 08 20 20 54 67 40 00 00:15:25.757 READ FPDMA QUEUED 60 08 18 60 4a 48 40 00 00:15:25.720 READ FPDMA QUEUED 60 08 10 a8 8a 66 40 00 00:15:25.720 READ FPDMA QUEUED 60 00 08 e8 4a 66 40 00 00:15:25.720 READ FPDMA QUEUED Error 15298 occurred at disk power-on lifetime: 9557 hours (398 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 08 60 4a 48 00 Error: UNC at LBA = 0x00484a60 = 4737632 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 40 e8 28 ea 13 40 00 00:15:24.304 READ FPDMA QUEUED 60 40 e0 c0 7c ab 40 00 00:15:23.286 READ FPDMA QUEUED 61 08 d8 08 2d 62 40 00 00:15:23.253 WRITE FPDMA QUEUED 61 01 d0 40 af 42 40 00 00:15:23.252 WRITE FPDMA QUEUED 61 08 c8 00 2d 62 40 00 00:15:23.251 WRITE FPDMA QUEUED Error 15297 occurred at disk power-on lifetime: 9557 hours (398 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 08 60 4a 48 00 Error: WP at LBA = 0x00484a60 = 4737632 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 31 40 81 25 27 40 00 00:15:20.811 WRITE FPDMA QUEUED 60 40 38 80 7c ab 40 00 00:15:20.810 READ FPDMA QUEUED 60 08 30 60 4a 48 40 00 00:15:20.795 READ FPDMA QUEUED 61 01 28 80 25 27 40 00 00:15:20.795 WRITE FPDMA QUEUED 60 08 20 a8 8a 66 40 00 00:15:20.794 READ FPDMA QUEUED Error 15296 occurred at disk power-on lifetime: 9557 hours (398 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 41 08 60 4a 48 00 Error: WP at LBA = 0x00484a60 = 4737632 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 01 00 80 25 27 40 00 00:15:20.018 WRITE FPDMA QUEUED 60 40 f8 40 7c ab 40 00 00:15:18.360 READ FPDMA QUEUED 60 08 f0 60 4a 48 40 00 00:15:18.344 READ FPDMA QUEUED 60 00 e8 e8 4a 66 40 00 00:15:18.344 READ FPDMA QUEUED 60 08 e0 a8 8a 66 40 00 00:15:18.344 READ FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 7474 - # 2 Short offline Completed without error 00% 7439 - # 3 Short offline Completed without error 00% 7408 - # 4 Short offline Completed without error 00% 7364 - # 5 Short offline Completed without error 00% 7343 - # 6 Short offline Completed without error 00% 7334 - # 7 Short offline Completed without error 00% 7334 - # 8 Short offline Completed without error 00% 7319 - # 9 Short offline Completed without error 00% 7289 - #10 Short offline Completed without error 00% 7282 - #11 Short offline Completed without error 00% 7271 - #12 Short offline Completed without error 00% 7249 - #13 Short offline Completed without error 00% 7234 - #14 Short offline Completed without error 00% 7206 - #15 Short offline Completed without error 00% 7173 - #16 Short offline Completed without error 00% 7154 - #17 Short offline Completed without error 00% 7137 - #18 Short offline Completed without error 00% 7130 - #19 Short offline Completed without error 00% 7098 - #20 Short offline Completed without error 00% 7076 - #21 Short offline Completed without error 00% 7061 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.