smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7(64)-sp1] (sf-5.43-1) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: HGST HTS721010A9E630 Serial Number: JG40006PGG2H5C LU WWN Device Id: 5 000cca 6acc6668a Firmware Version: JB0OA3B0 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Sun May 01 22:52:16 2016 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 191) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 171 171 033 Pre-fail Always - 2 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 912 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 091 091 000 Old_age Always - 4345 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 907 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 18 193 Load_Cycle_Count 0x0012 079 079 000 Old_age Always - 215156 194 Temperature_Celsius 0x0002 150 150 000 Old_age Always - 40 (Min/Max 13/53) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 40 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 404 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 404 occurred at disk power-on lifetime: 4344 hours (181 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 3a 80 8a 72 00 Error: WP at LBA = 0x00728a80 = 7506560 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 08 00 a8 0e 63 40 00 06:55:16.004 WRITE FPDMA QUEUED 61 08 00 b0 0e 63 40 00 06:55:16.004 WRITE FPDMA QUEUED 61 20 00 18 b8 64 40 00 06:55:16.004 WRITE FPDMA QUEUED 61 08 00 80 19 67 40 00 06:55:13.899 WRITE FPDMA QUEUED 61 80 30 20 83 7e 40 00 06:55:13.899 WRITE FPDMA QUEUED Error 403 occurred at disk power-on lifetime: 4344 hours (181 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 2a f0 78 72 00 Error: UNC at LBA = 0x007278f0 = 7502064 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 c0 08 1a 79 72 40 00 06:55:10.902 READ FPDMA QUEUED 60 00 00 1a 78 72 40 00 06:55:10.902 READ FPDMA QUEUED 60 00 00 d0 6f b7 40 00 06:55:10.865 READ FPDMA QUEUED 60 00 00 d0 6e b7 40 00 06:55:10.864 READ FPDMA QUEUED 60 00 00 d0 ad ee 40 00 06:55:10.849 READ FPDMA QUEUED Error 402 occurred at disk power-on lifetime: 4344 hours (181 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 0a 20 71 72 00 Error: UNC at LBA = 0x00727120 = 7500064 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 18 10 2a 71 72 40 00 06:55:07.798 READ FPDMA QUEUED 60 00 08 2a 70 72 40 00 06:55:07.798 READ FPDMA QUEUED 60 00 00 2a 6f 72 40 00 06:55:07.798 READ FPDMA QUEUED 60 00 00 d0 6c b7 40 00 06:55:07.766 READ FPDMA QUEUED 61 00 78 d0 c4 83 40 00 06:55:07.757 WRITE FPDMA QUEUED Error 401 occurred at disk power-on lifetime: 4344 hours (181 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 5a 58 69 72 00 Error: UNC at LBA = 0x00726958 = 7498072 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 10 d0 69 b7 40 00 06:55:04.571 READ FPDMA QUEUED 60 00 08 b2 69 72 40 00 06:55:04.524 READ FPDMA QUEUED 60 00 00 b2 68 72 40 00 06:55:04.524 READ FPDMA QUEUED 60 00 00 d0 cb 02 40 00 06:55:03.787 READ FPDMA QUEUED 60 00 00 d0 e7 d1 40 00 06:55:02.984 READ FPDMA QUEUED Error 400 occurred at disk power-on lifetime: 4344 hours (181 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 3a 80 8a 72 00 Error: UNC at LBA = 0x00728a80 = 7506560 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 d0 65 b7 40 00 06:54:59.897 READ FPDMA QUEUED 61 00 78 d0 e4 02 40 00 06:54:59.890 WRITE FPDMA QUEUED 61 00 70 d0 e3 02 40 00 06:54:59.890 WRITE FPDMA QUEUED 61 00 68 d0 e2 02 40 00 06:54:59.890 WRITE FPDMA QUEUED 61 00 60 d0 e1 02 40 00 06:54:59.890 WRITE FPDMA QUEUED SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.