smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7-sp1] (sf-5.43-1) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD3200BEVT-22ZCT0 Serial Number: WD-WXH0A99J7745 LU WWN Device Id: 5 0014ee 2ae3794ef Firmware Version: 11.01A11 User Capacity: 320 072 933 376 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Apr 14 12:15:06 2016 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. No failed Attributes found. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10380) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 122) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 198 198 047 Pre-fail Always - 41068 3 Spin_Up_Time 0x0027 188 186 039 Pre-fail Always - 1600 4 Start_Stop_Count 0x0032 095 095 050 Old_age Always - 5092 5 Reallocated_Sector_Ct 0x0033 105 105 051 Pre-fail Always - 754 7 Seek_Error_Rate 0x002e 100 253 046 Old_age Always - 0 9 Power_On_Hours 0x0032 086 086 050 Old_age Always - 10860 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0032 100 100 050 Old_age Always - 0 12 Power_Cycle_Count 0x0032 096 096 050 Old_age Always - 4150 192 Power-Off_Retract_Count 0x0032 200 200 050 Old_age Always - 323 193 Load_Cycle_Count 0x0032 147 147 050 Old_age Always - 161995 194 Temperature_Celsius 0x0022 125 088 034 Old_age Always - 22 196 Reallocated_Event_Count 0x0032 200 200 050 Old_age Always - 0 197 Current_Pending_Sector 0x0032 190 182 050 Old_age Always - 571 198 Offline_Uncorrectable 0x0030 100 253 048 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 050 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 100 253 009 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 38208 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 38208 occurred at disk power-on lifetime: 10820 hours (450 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff e6 10 40 Error: UNC at LBA = 0x0010e6ff = 1107711 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 08 30 28 55 28 12 00 00:26:00.803 READ FPDMA QUEUED 60 40 28 f8 e6 10 1d 00 00:26:00.803 READ FPDMA QUEUED 60 20 20 92 37 0b 02 00 00:26:00.803 READ FPDMA QUEUED 61 08 18 60 cf 19 02 00 00:26:00.787 WRITE FPDMA QUEUED 60 20 10 00 e3 0f 12 00 00:26:00.787 READ FPDMA QUEUED Error 38207 occurred at disk power-on lifetime: 10820 hours (450 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 3e e9 10 40 Error: UNC at LBA = 0x0010e93e = 1108286 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 20 f8 00 e3 0f 12 00 00:25:57.668 READ FPDMA QUEUED 61 08 f0 60 cf 19 02 00 00:25:57.632 WRITE FPDMA QUEUED 60 80 e8 00 e9 10 1d 00 00:25:57.620 READ FPDMA QUEUED 60 20 e0 92 37 0b 02 00 00:25:57.620 READ FPDMA QUEUED 61 08 d8 20 cf 19 02 00 00:25:57.599 WRITE FPDMA QUEUED Error 38206 occurred at disk power-on lifetime: 10820 hours (450 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 3e e9 10 40 Error: UNC at LBA = 0x0010e93e = 1108286 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 80 b8 00 e9 10 1d 00 00:25:54.442 READ FPDMA QUEUED 60 40 b0 f8 e6 10 1d 00 00:25:54.442 READ FPDMA QUEUED 60 08 a8 60 52 28 12 00 00:25:54.442 READ FPDMA QUEUED 61 08 a0 f8 e2 0f 12 00 00:25:54.442 WRITE FPDMA QUEUED 61 08 98 20 cf 19 02 00 00:25:54.442 WRITE FPDMA QUEUED Error 38205 occurred at disk power-on lifetime: 10820 hours (450 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff e6 10 40 Error: UNC at LBA = 0x0010e6ff = 1107711 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 40 78 f8 e6 10 1d 00 00:25:50.686 READ FPDMA QUEUED 2f 00 01 10 00 00 00 00 00:25:50.686 READ LOG EXT 60 80 68 f8 e8 10 1d 00 00:25:47.536 READ FPDMA QUEUED 60 40 60 f8 e6 10 1d 00 00:25:47.536 READ FPDMA QUEUED 60 08 58 58 52 28 12 00 00:25:47.535 READ FPDMA QUEUED Error 38204 occurred at disk power-on lifetime: 10820 hours (450 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 3e e9 10 40 Error: UNC at LBA = 0x0010e93e = 1108286 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 80 68 f8 e8 10 1d 00 00:25:47.536 READ FPDMA QUEUED 60 40 60 f8 e6 10 1d 00 00:25:47.536 READ FPDMA QUEUED 60 08 58 58 52 28 12 00 00:25:47.535 READ FPDMA QUEUED 61 08 50 e0 e2 0f 12 00 00:25:47.535 WRITE FPDMA QUEUED 61 08 48 70 ce 19 02 00 00:25:47.535 WRITE FPDMA QUEUED SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.