smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win7(64)] (sf-5.43-1) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Momentus 5400.4 Device Model: ST9250827AS Serial Number: 5RG2KGKB LU WWN Device Id: 5 000c50 00df755b5 Firmware Version: 3.AHC User Capacity: 250 059 350 016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Sun Feb 28 18:24:03 2016 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 426) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 93) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 099 099 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 096 096 020 Pre-fail Always - 4708 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 4899787802 9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13278 10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 096 096 020 Pre-fail Always - 4605 184 End-to-End_Error 0x0033 100 253 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x003a 082 082 000 Old_age Always - 18 188 Command_Timeout 0x0032 001 001 000 Old_age Always - 77310686875 189 High_Fly_Writes 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0032 070 048 040 Old_age Always - 30 (Min/Max 12/52) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 107 192 Power-Off_Retract_Count 0x003a 100 100 000 Old_age Always - 1372 193 Load_Cycle_Count 0x0012 059 059 000 Old_age Always - 83195 194 Temperature_Celsius 0x003a 030 052 000 Old_age Always - 30 (0 12 0 0 0) 195 Hardware_ECC_Recovered 0x003e 060 044 000 Old_age Always - 75851017 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 18 198 Offline_Uncorrectable 0x003e 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 18 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 18 occurred at disk power-on lifetime: 12284 hours (511 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ae a5 90 e0 Error: UNC at LBA = 0x0090a5ae = 9479598 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 01 ae a5 90 e0 00 02:13:15.529 READ VERIFY SECTOR(S) EXT 42 00 01 ad a5 90 e0 00 02:13:15.508 READ VERIFY SECTOR(S) EXT 42 00 02 ad a5 90 e0 00 02:13:12.642 READ VERIFY SECTOR(S) EXT 42 00 02 ab a5 90 e0 00 02:13:12.621 READ VERIFY SECTOR(S) EXT 42 00 04 ab a5 90 e0 00 02:13:09.754 READ VERIFY SECTOR(S) EXT Error 17 occurred at disk power-on lifetime: 12284 hours (511 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ae a5 90 e0 Error: UNC at LBA = 0x0090a5ae = 9479598 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 02 ad a5 90 e0 00 02:12:55.315 READ VERIFY SECTOR(S) EXT 42 00 02 ab a5 90 e0 00 02:12:55.313 READ VERIFY SECTOR(S) EXT 42 00 04 ab a5 90 e0 00 02:13:12.642 READ VERIFY SECTOR(S) EXT 42 00 04 a7 a5 90 e0 00 02:13:12.621 READ VERIFY SECTOR(S) EXT 42 00 08 a7 a5 90 e0 00 02:13:09.754 READ VERIFY SECTOR(S) EXT Error 16 occurred at disk power-on lifetime: 12284 hours (511 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ae a5 90 e0 Error: UNC at LBA = 0x0090a5ae = 9479598 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 04 ab a5 90 e0 00 02:12:55.315 READ VERIFY SECTOR(S) EXT 42 00 04 a7 a5 90 e0 00 02:12:55.313 READ VERIFY SECTOR(S) EXT 42 00 08 a7 a5 90 e0 00 02:12:55.311 READ VERIFY SECTOR(S) EXT 42 00 08 9f a5 90 e0 00 02:12:55.309 READ VERIFY SECTOR(S) EXT 42 00 10 9f a5 90 e0 00 02:13:09.754 READ VERIFY SECTOR(S) EXT Error 15 occurred at disk power-on lifetime: 12284 hours (511 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ae a5 90 e0 Error: UNC at LBA = 0x0090a5ae = 9479598 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 08 a7 a5 90 e0 00 02:12:55.315 READ VERIFY SECTOR(S) EXT 42 00 08 9f a5 90 e0 00 02:12:55.313 READ VERIFY SECTOR(S) EXT 42 00 10 9f a5 90 e0 00 02:12:55.311 READ VERIFY SECTOR(S) EXT 42 00 10 8f a5 90 e0 00 02:12:55.309 READ VERIFY SECTOR(S) EXT 42 00 20 af a5 90 e0 00 02:12:55.307 READ VERIFY SECTOR(S) EXT Error 14 occurred at disk power-on lifetime: 12284 hours (511 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ae a5 90 e0 Error: UNC at LBA = 0x0090a5ae = 9479598 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 10 9f a5 90 e0 00 02:12:55.315 READ VERIFY SECTOR(S) EXT 42 00 10 8f a5 90 e0 00 02:12:55.313 READ VERIFY SECTOR(S) EXT 42 00 20 af a5 90 e0 00 02:12:55.311 READ VERIFY SECTOR(S) EXT 42 00 20 8f a5 90 e0 00 02:12:55.309 READ VERIFY SECTOR(S) EXT 42 00 40 8f a5 90 e0 00 02:12:55.307 READ VERIFY SECTOR(S) EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 90% 13278 - # 2 Short offline Completed without error 00% 13278 - # 3 Extended offline Completed: read failure 90% 12281 56740881 # 4 Short offline Interrupted (host reset) 20% 4 - # 5 Short offline Completed without error 00% 3 - # 6 Short offline Completed without error 00% 3 - # 7 Short offline Completed without error 00% 2 - # 8 Short offline Completed without error 00% 2 - # 9 Short offline Completed without error 00% 2 - #10 Short offline Completed without error 00% 1 - #11 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.