smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-37-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus Device Model: ST3120026AS Serial Number: 3LJ3HCTN Firmware Version: 3.01 User Capacity: 120,033,041,920 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 Local Time is: Thu Aug 20 21:00:07 2015 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 075 058 006 Pre-fail Always - 143453319 3 Spin_Up_Time 0x0003 097 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 091 091 020 Old_age Always - 9249 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 090 060 030 Pre-fail Always - 994463935 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 18720 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 091 091 020 Old_age Always - 10125 194 Temperature_Celsius 0x0022 054 060 000 Old_age Always - 54 195 Hardware_ECC_Recovered 0x001a 075 058 000 Old_age Always - 143453319 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x003e 200 001 000 Old_age Always - 1372 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 65 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 65 occurred at disk power-on lifetime: 6885 hours (286 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 3f 00 5e e0 Error: UNC at LBA = 0x005e003f = 6160447 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 d8 08 3f 00 5e e0 00 00:00:24.097 READ MULTIPLE c4 d8 08 3f 00 5e e0 00 00:00:24.097 READ MULTIPLE c4 d8 08 47 00 5e e0 00 00:00:24.097 READ MULTIPLE c4 d8 08 37 00 5e e0 00 00:00:24.096 READ MULTIPLE c4 d8 08 2f 00 5e e0 00 00:00:24.096 READ MULTIPLE Error 64 occurred at disk power-on lifetime: 6885 hours (286 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 3f 00 5e e0 Error: UNC at LBA = 0x005e003f = 6160447 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 d8 08 3f 00 5e e0 00 00:00:24.097 READ MULTIPLE c4 d8 08 47 00 5e e0 00 00:00:24.097 READ MULTIPLE c4 d8 08 37 00 5e e0 00 00:00:24.097 READ MULTIPLE c4 d8 08 2f 00 5e e0 00 00:00:24.096 READ MULTIPLE c4 d8 08 cf 48 7e e1 00 00:00:24.096 READ MULTIPLE Error 63 occurred at disk power-on lifetime: 2839 hours (118 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 03 7a 14 4f e1 Error: UNC 3 sectors at LBA = 0x014f147a = 21959802 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 77 14 4f e1 00 00:05:33.604 READ DMA ca 00 08 5f db 4c e1 00 00:05:33.595 WRITE DMA c8 00 78 af b2 4a e1 00 00:05:33.591 READ DMA c8 00 08 37 e6 60 e0 00 00:05:37.423 READ DMA ca 00 08 47 00 5e e0 00 00:05:37.423 WRITE DMA Error 62 occurred at disk power-on lifetime: 2839 hours (118 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 03 7a 14 4f e1 Error: UNC 3 sectors at LBA = 0x014f147a = 21959802 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 77 14 4f e1 00 00:05:33.604 READ DMA c8 00 10 67 b3 4a e1 00 00:05:33.595 READ DMA c8 00 80 2f b2 4a e1 00 00:05:33.591 READ DMA c8 00 08 2f e6 60 e0 00 00:05:33.581 READ DMA ca 00 08 bf 6a 5f e0 00 00:05:33.581 WRITE DMA Error 61 occurred at disk power-on lifetime: 2839 hours (118 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 03 7a 14 4f e1 Error: UNC 3 sectors at LBA = 0x014f147a = 21959802 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 77 14 4f e1 00 00:05:22.042 READ DMA ca 00 08 5f db 4c e1 00 00:05:29.644 WRITE DMA ca 00 20 f7 f0 49 e1 00 00:05:29.643 WRITE DMA c8 00 08 07 e6 60 e0 00 00:05:29.643 READ DMA ca 00 28 97 6a 5f e0 00 00:05:29.630 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 7315 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.