smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win10] (sf-6.5-1) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: S2ZPJ9HDB12486 LU WWN Device Id: 5 0004cf 20ba910ed Firmware Version: 2AR20003 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Aug 16 17:07:50 2018 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13380) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 223) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 740 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 086 086 025 - 4457 4 Start_Stop_Count -O--CK 098 098 000 - 2803 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 6923 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 8 12 Power_Cycle_Count -O--CK 098 098 000 - 2662 191 G-Sense_Error_Rate -O---K 100 100 000 - 54 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 058 000 - 28 (Min/Max 11/50) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 100 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 6559 223 Load_Retry_Count -O--CK 100 100 000 - 8 225 Load_Cycle_Count -O--CK 088 088 000 - 127087 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 719 (device log contains only the most recent 8 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 719 [6] occurred at disk power-on lifetime: 6865 hours (286 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 32 c0 90 40 00 Error: UNC at LBA = 0x0032c090 = 3326096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 d5 00 08 00 00 00 32 c0 90 40 00 00:00:00.062 READ FPDMA QUEUED 60 00 d5 00 08 00 00 00 32 c0 90 40 00 00:00:00.138 READ FPDMA QUEUED 61 00 d5 00 08 00 00 00 03 75 38 40 00 00:00:00.138 WRITE FPDMA QUEUED e7 00 d5 00 01 00 00 00 c2 4f c0 00 00 00:00:00.138 FLUSH CACHE b0 00 d5 00 01 00 00 00 c2 4f c0 00 00 00:00:00.138 SMART READ LOG Error 718 [5] occurred at disk power-on lifetime: 6865 hours (286 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 32 c0 90 40 00 Error: UNC at LBA = 0x0032c090 = 3326096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 03 00 08 00 00 00 32 c0 90 40 00 00:00:00.060 READ FPDMA QUEUED 60 00 d5 00 08 00 00 00 32 c0 90 40 00 00:00:00.136 READ FPDMA QUEUED e7 00 d5 00 08 00 00 00 66 0f 30 00 00 00:00:00.136 FLUSH CACHE 35 00 d5 00 08 00 00 00 66 0f 30 40 00 00:00:00.136 WRITE DMA EXT b0 00 d5 00 01 00 00 00 c2 4f c0 00 00 00:00:00.135 SMART READ LOG Error 717 [4] occurred at disk power-on lifetime: 6865 hours (286 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 32 c0 90 40 00 Error: UNC at LBA = 0x0032c090 = 3326096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 03 00 08 00 00 00 32 c0 90 40 00 00:00:00.056 READ FPDMA QUEUED 60 00 d5 00 08 00 00 00 32 c0 90 40 00 00:00:00.133 READ FPDMA QUEUED 61 00 d5 00 3d 00 00 00 03 a5 81 40 00 00:00:00.133 WRITE FPDMA QUEUED 61 00 d5 00 08 00 00 00 66 c3 38 40 00 00:00:00.133 WRITE FPDMA QUEUED b0 00 d5 00 01 00 00 00 c2 4f c0 00 00 00:00:00.133 SMART READ LOG Error 716 [3] occurred at disk power-on lifetime: 6865 hours (286 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 32 c0 90 40 00 Error: UNC at LBA = 0x0032c090 = 3326096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 08 00 00 00 32 c0 90 40 00 00:00:00.054 READ FPDMA QUEUED 60 00 d5 00 08 00 00 00 32 c0 90 40 00 00:00:00.131 READ FPDMA QUEUED 35 00 d5 00 08 00 00 00 03 75 28 40 00 00:00:00.131 WRITE DMA EXT b0 00 d5 00 01 00 00 00 c2 4f c0 00 00 00:00:00.131 SMART READ LOG b0 00 d5 00 01 00 00 00 c2 4f 00 00 00 00:00:00.131 SMART READ LOG Error 715 [2] occurred at disk power-on lifetime: 6865 hours (286 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 32 c0 90 40 00 Error: UNC at LBA = 0x0032c090 = 3326096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 08 00 00 00 32 c0 90 40 00 00:00:00.054 READ FPDMA QUEUED 60 00 d5 00 08 00 00 00 32 c0 90 40 00 00:00:00.129 READ FPDMA QUEUED e7 00 d5 00 01 00 00 00 c2 4f c0 00 00 00:00:00.129 FLUSH CACHE b0 00 d5 00 01 00 00 00 c2 4f c0 00 00 00:00:00.129 SMART READ LOG b0 00 d5 00 01 00 00 00 c2 4f 00 00 00 00:00:00.129 SMART READ LOG Error 714 [1] occurred at disk power-on lifetime: 6865 hours (286 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 32 c0 90 40 00 Error: UNC at LBA = 0x0032c090 = 3326096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 08 00 00 00 32 c0 90 40 00 00:00:00.052 READ FPDMA QUEUED 60 00 d5 00 08 00 00 00 32 c0 90 40 00 00:00:00.127 READ FPDMA QUEUED 35 00 d5 00 08 00 00 00 03 75 40 40 00 00:00:00.127 WRITE DMA EXT b0 00 d5 00 01 00 00 00 c2 4f c0 00 00 00:00:00.127 SMART READ LOG b0 00 d5 00 01 00 00 00 c2 4f 00 00 00 00:00:00.126 SMART READ LOG Error 713 [0] occurred at disk power-on lifetime: 6865 hours (286 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 32 c0 90 40 00 Error: WP at LBA = 0x0032c090 = 3326096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 d5 00 08 00 00 00 03 75 40 40 00 00:00:00.083 WRITE FPDMA QUEUED 60 00 08 00 08 00 00 00 32 c0 90 40 00 00:00:00.051 READ FPDMA QUEUED 60 00 d5 00 08 00 00 00 32 c0 90 40 00 00:00:00.081 READ FPDMA QUEUED 60 00 d5 00 01 00 00 00 0a f8 00 40 00 00:00:00.081 READ FPDMA QUEUED 60 00 d5 00 01 00 00 00 0a f8 00 40 00 00:00:00.081 READ FPDMA QUEUED Error 712 [7] occurred at disk power-on lifetime: 6865 hours (286 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 08 00 00 00 32 c0 90 40 00 Error: UNC at LBA = 0x0032c090 = 3326096 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 08 00 00 00 32 c0 90 40 00 00:00:00.051 READ FPDMA QUEUED 60 00 08 00 01 00 00 00 00 08 00 40 00 00:00:00.079 READ FPDMA QUEUED 60 00 d5 00 08 00 00 00 32 c0 90 40 00 00:00:00.079 READ FPDMA QUEUED b0 00 d5 00 01 00 00 00 c2 4f c0 00 00 00:00:00.078 SMART READ LOG b0 00 d5 00 01 00 00 00 c2 4f 00 00 00 00:00:00.078 SMART READ LOG SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 28/28 Celsius Lifetime Min/Max Temperature: 11/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (25) Index Estimated Time Temperature Celsius 26 2018-08-16 06:30 28 ********* 27 2018-08-16 06:35 42 *********************** 28 2018-08-16 06:40 43 ************************ 29 2018-08-16 06:45 44 ************************* 30 2018-08-16 06:50 45 ************************** 31 2018-08-16 06:55 45 ************************** 32 2018-08-16 07:00 46 *************************** 33 2018-08-16 07:05 47 **************************** 34 2018-08-16 07:10 47 **************************** 35 2018-08-16 07:15 48 ***************************** ... ..( 5 skipped). .. ***************************** 41 2018-08-16 07:45 48 ***************************** 42 2018-08-16 07:50 49 ****************************** ... ..( 3 skipped). .. ****************************** 46 2018-08-16 08:10 49 ****************************** 47 2018-08-16 08:15 47 **************************** 48 2018-08-16 08:20 44 ************************* 49 2018-08-16 08:25 42 *********************** 50 2018-08-16 08:30 39 ******************** ... ..( 4 skipped). .. ******************** 55 2018-08-16 08:55 39 ******************** 56 2018-08-16 09:00 36 ***************** 57 2018-08-16 09:05 37 ****************** 58 2018-08-16 09:10 39 ******************** 59 2018-08-16 09:15 40 ********************* 60 2018-08-16 09:20 40 ********************* 61 2018-08-16 09:25 41 ********************** 62 2018-08-16 09:30 43 ************************ 63 2018-08-16 09:35 43 ************************ 64 2018-08-16 09:40 44 ************************* 65 2018-08-16 09:45 45 ************************** 66 2018-08-16 09:50 45 ************************** 67 2018-08-16 09:55 46 *************************** 68 2018-08-16 10:00 46 *************************** 69 2018-08-16 10:05 46 *************************** 70 2018-08-16 10:10 47 **************************** ... ..( 3 skipped). .. **************************** 74 2018-08-16 10:30 47 **************************** 75 2018-08-16 10:35 48 ***************************** ... ..( 2 skipped). .. ***************************** 78 2018-08-16 10:50 48 ***************************** 79 2018-08-16 10:55 44 ************************* 80 2018-08-16 11:00 43 ************************ 81 2018-08-16 11:05 37 ****************** 82 2018-08-16 11:10 39 ******************** 83 2018-08-16 11:15 39 ******************** 84 2018-08-16 11:20 36 ***************** 85 2018-08-16 11:25 38 ******************* 86 2018-08-16 11:30 40 ********************* 87 2018-08-16 11:35 41 ********************** 88 2018-08-16 11:40 42 *********************** 89 2018-08-16 11:45 41 ********************** 90 2018-08-16 11:50 40 ********************* 91 2018-08-16 11:55 40 ********************* 92 2018-08-16 12:00 36 ***************** 93 2018-08-16 12:05 28 ********* 94 2018-08-16 12:10 32 ************* 95 2018-08-16 12:15 35 **************** 96 2018-08-16 12:20 38 ******************* 97 2018-08-16 12:25 39 ******************** 98 2018-08-16 12:30 34 *************** 99 2018-08-16 12:35 34 *************** 100 2018-08-16 12:40 36 ***************** 101 2018-08-16 12:45 36 ***************** 102 2018-08-16 12:50 36 ***************** 103 2018-08-16 12:55 37 ****************** 104 2018-08-16 13:00 39 ******************** 105 2018-08-16 13:05 41 ********************** 106 2018-08-16 13:10 42 *********************** 107 2018-08-16 13:15 43 ************************ 108 2018-08-16 13:20 43 ************************ 109 2018-08-16 13:25 44 ************************* 110 2018-08-16 13:30 44 ************************* 111 2018-08-16 13:35 43 ************************ 112 2018-08-16 13:40 45 ************************** 113 2018-08-16 13:45 45 ************************** 114 2018-08-16 13:50 45 ************************** 115 2018-08-16 13:55 46 *************************** 116 2018-08-16 14:00 46 *************************** 117 2018-08-16 14:05 47 **************************** 118 2018-08-16 14:10 47 **************************** 119 2018-08-16 14:15 48 ***************************** ... ..( 2 skipped). .. ***************************** 122 2018-08-16 14:30 48 ***************************** 123 2018-08-16 14:35 49 ****************************** 124 2018-08-16 14:40 48 ***************************** 125 2018-08-16 14:45 49 ****************************** 126 2018-08-16 14:50 45 ************************** 127 2018-08-16 14:55 41 ********************** 0 2018-08-16 15:00 40 ********************* 1 2018-08-16 15:05 39 ******************** 2 2018-08-16 15:10 38 ******************* ... ..( 2 skipped). .. ******************* 5 2018-08-16 15:25 38 ******************* 6 2018-08-16 15:30 35 **************** 7 2018-08-16 15:35 34 *************** 8 2018-08-16 15:40 36 ***************** 9 2018-08-16 15:45 37 ****************** 10 2018-08-16 15:50 35 **************** 11 2018-08-16 15:55 33 ************** 12 2018-08-16 16:00 36 ***************** 13 2018-08-16 16:05 37 ****************** 14 2018-08-16 16:10 36 ***************** 15 2018-08-16 16:15 35 **************** 16 2018-08-16 16:20 38 ******************* 17 2018-08-16 16:25 39 ******************** 18 2018-08-16 16:30 42 *********************** 19 2018-08-16 16:35 45 ************************** 20 2018-08-16 16:40 48 ***************************** 21 2018-08-16 16:45 30 *********** 22 2018-08-16 16:50 33 ************** 23 2018-08-16 16:55 35 **************** 24 2018-08-16 17:00 38 ******************* 25 2018-08-16 17:05 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific