smartctl 6.6 2017-11-05 r4594 [i686-w64-mingw32-w10-1703(64)] (sf-6.6-1) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST1000LM035-1RK172 Serial Number: WDE7C098 LU WWN Device Id: 5 000c50 0a8ef11b6 Firmware Version: SDM1 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Feb 03 21:23:19 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 170) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 078 061 006 - 65700059 3 Spin_Up_Time PO---- 099 099 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 1194 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 080 060 045 - 4387081242 9 Power_On_Hours -O--CK 100 100 000 - 830 (126 128 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 505 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 081 081 000 - 19 188 Command_Timeout -O--CK 100 099 000 - 8 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 061 049 040 - 39 (Min/Max 29/39) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 65 192 Power-Off_Retract_Count -O--CK 100 100 000 - 12 193 Load_Cycle_Count -O--CK 098 098 000 - 5269 194 Temperature_Celsius -O---K 039 051 000 - 39 (0 11 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 821 (22 39 0) 241 Total_LBAs_Written ------ 100 253 000 - 5175596644 242 Total_LBAs_Read ------ 100 253 000 - 9062182692 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 8160 Device vendor specific log 0xa8 GPL,SL VS 136 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 8920 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc2 GPL,SL VS 240 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 24 Device vendor specific log 0xc9 GPL,SL VS 1 Device vendor specific log 0xca GPL,SL VS 16 Device vendor specific log 0xd3 GPL VS 1920 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 19 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 19 [18] log entry is empty Error 18 [17] log entry is empty Error 17 [16] log entry is empty Error 16 [15] log entry is empty Error 15 [14] log entry is empty Error 14 [13] log entry is empty Error 13 [12] log entry is empty Error 12 [11] log entry is empty Error 11 [10] log entry is empty Error 10 [9] log entry is empty Error 9 [8] log entry is empty Error 8 [7] log entry is empty Error 7 [6] log entry is empty Error 6 [5] log entry is empty Error 5 [4] log entry is empty Error 4 [3] occurred at disk power-on lifetime: 144 hours (6 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 43 4e 9e 60 00 00 Error: UNC at LBA = 0x434e9e60 = 1129225824 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 3d ad e4 20 40 00 00:28:48.458 READ FPDMA QUEUED 60 00 00 00 03 00 00 02 69 e5 6a 40 00 00:28:48.456 READ FPDMA QUEUED 60 00 00 00 08 00 00 3a 97 ce 18 40 00 00:28:48.358 READ FPDMA QUEUED 60 00 00 00 08 00 00 3e 0d 7f a0 40 00 00:28:48.355 READ FPDMA QUEUED 60 00 00 00 05 00 00 02 69 e5 68 40 00 00:28:48.355 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 144 hours (6 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 43 4e 9e 60 00 00 Error: UNC at LBA = 0x434e9e60 = 1129225824 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 3a ad 30 58 40 00 00:28:45.920 READ FPDMA QUEUED 60 00 00 00 10 00 00 02 70 1e d0 40 00 00:28:45.905 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 6e 70 f8 40 00 00:28:45.893 READ FPDMA QUEUED 60 00 00 00 20 00 00 03 ce cc 94 40 00 00:28:45.858 READ FPDMA QUEUED 60 00 00 00 10 00 00 42 9a b5 20 40 00 00:28:45.783 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 144 hours (6 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 43 4e 9e 60 00 00 Error: UNC at LBA = 0x434e9e60 = 1129225824 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 20 00 00 3a 57 e9 88 40 00 00:28:43.358 READ FPDMA QUEUED 60 00 00 00 38 00 00 3b 0e 4f 70 40 00 00:28:43.311 READ FPDMA QUEUED 60 00 00 00 28 00 00 3b 0e 4f c0 40 00 00:28:43.309 READ FPDMA QUEUED 60 00 00 00 30 00 00 3b 0e 4f 98 40 00 00:28:43.308 READ FPDMA QUEUED 60 00 00 00 38 00 00 3b 0e 4f e0 40 00 00:28:43.307 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 144 hours (6 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 43 4e 9e 60 00 00 Error: UNC at LBA = 0x434e9e60 = 1129225824 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 3d e3 84 f0 40 00 00:28:40.857 READ FPDMA QUEUED 60 00 00 00 08 00 00 02 e3 5b 68 40 00 00:28:40.823 READ FPDMA QUEUED 60 00 00 00 40 00 00 43 4e 9e 60 40 00 00:28:40.790 READ FPDMA QUEUED 60 00 00 00 08 00 00 3d af 4a 78 40 00 00:28:40.727 READ FPDMA QUEUED 60 00 00 00 05 00 00 3d 95 61 88 40 00 00:28:40.723 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 29/39 Celsius Lifetime Min/Max Temperature: 11/51 Celsius Lifetime Average Temperature: 34 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 30 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (73) Index Estimated Time Temperature Celsius 74 2018-02-01 05:30 40 ********************* 75 2018-02-01 06:00 40 ********************* 76 2018-02-01 06:30 35 **************** 77 2018-02-01 07:00 33 ************** 78 2018-02-01 07:30 37 ****************** 79 2018-02-01 08:00 36 ***************** 80 2018-02-01 08:30 34 *************** ... ..( 3 skipped). .. *************** 84 2018-02-01 10:30 34 *************** 85 2018-02-01 11:00 ? - 86 2018-02-01 11:30 17 - 87 2018-02-01 12:00 ? - 88 2018-02-01 12:30 18 - 89 2018-02-01 13:00 33 ************** 90 2018-02-01 13:30 ? - 91 2018-02-01 14:00 23 **** 92 2018-02-01 14:30 30 *********** 93 2018-02-01 15:00 32 ************* 94 2018-02-01 15:30 31 ************ 95 2018-02-01 16:00 ? - 96 2018-02-01 16:30 23 **** 97 2018-02-01 17:00 29 ********** 98 2018-02-01 17:30 37 ****************** 99 2018-02-01 18:00 37 ****************** 100 2018-02-01 18:30 35 **************** 101 2018-02-01 19:00 30 *********** 102 2018-02-01 19:30 30 *********** 103 2018-02-01 20:00 29 ********** 104 2018-02-01 20:30 29 ********** 105 2018-02-01 21:00 31 ************ 106 2018-02-01 21:30 32 ************* 107 2018-02-01 22:00 37 ****************** 108 2018-02-01 22:30 36 ***************** 109 2018-02-01 23:00 36 ***************** 110 2018-02-01 23:30 ? - 111 2018-02-02 00:00 17 - 112 2018-02-02 00:30 ? - 113 2018-02-02 01:00 18 - 114 2018-02-02 01:30 37 ****************** 115 2018-02-02 02:00 36 ***************** 116 2018-02-02 02:30 36 ***************** 117 2018-02-02 03:00 ? - 118 2018-02-02 03:30 22 *** 119 2018-02-02 04:00 37 ****************** 120 2018-02-02 04:30 39 ******************** 121 2018-02-02 05:00 39 ******************** 122 2018-02-02 05:30 ? - 123 2018-02-02 06:00 22 *** 124 2018-02-02 06:30 38 ******************* 125 2018-02-02 07:00 38 ******************* 126 2018-02-02 07:30 36 ***************** ... ..( 3 skipped). .. ***************** 2 2018-02-02 09:30 36 ***************** 3 2018-02-02 10:00 ? - 4 2018-02-02 10:30 17 - 5 2018-02-02 11:00 ? - 6 2018-02-02 11:30 16 - 7 2018-02-02 12:00 37 ****************** 8 2018-02-02 12:30 36 ***************** 9 2018-02-02 13:00 33 ************** 10 2018-02-02 13:30 32 ************* 11 2018-02-02 14:00 34 *************** 12 2018-02-02 14:30 35 **************** 13 2018-02-02 15:00 39 ******************** 14 2018-02-02 15:30 40 ********************* 15 2018-02-02 16:00 38 ******************* 16 2018-02-02 16:30 37 ****************** 17 2018-02-02 17:00 32 ************* 18 2018-02-02 17:30 ? - 19 2018-02-02 18:00 25 ****** 20 2018-02-02 18:30 33 ************** 21 2018-02-02 19:00 34 *************** 22 2018-02-02 19:30 31 ************ 23 2018-02-02 20:00 30 *********** 24 2018-02-02 20:30 30 *********** 25 2018-02-02 21:00 31 ************ 26 2018-02-02 21:30 33 ************** 27 2018-02-02 22:00 33 ************** 28 2018-02-02 22:30 ? - 29 2018-02-02 23:00 17 - 30 2018-02-02 23:30 ? - 31 2018-02-03 00:00 14 - 32 2018-02-03 00:30 32 ************* 33 2018-02-03 01:00 ? - 34 2018-02-03 01:30 22 *** 35 2018-02-03 02:00 45 ************************** 36 2018-02-03 02:30 ? - 37 2018-02-03 03:00 20 * 38 2018-02-03 03:30 ? - 39 2018-02-03 04:00 20 * 40 2018-02-03 04:30 45 ************************** 41 2018-02-03 05:00 ? - 42 2018-02-03 05:30 46 *************************** 43 2018-02-03 06:00 ? - 44 2018-02-03 06:30 47 **************************** 45 2018-02-03 07:00 ? - 46 2018-02-03 07:30 47 **************************** 47 2018-02-03 08:00 47 **************************** 48 2018-02-03 08:30 46 *************************** 49 2018-02-03 09:00 47 **************************** 50 2018-02-03 09:30 48 ***************************** 51 2018-02-03 10:00 48 ***************************** 52 2018-02-03 10:30 50 ******************************* 53 2018-02-03 11:00 51 ******************************** 54 2018-02-03 11:30 50 ******************************* 55 2018-02-03 12:00 ? - 56 2018-02-03 12:30 35 **************** 57 2018-02-03 13:00 ? - 58 2018-02-03 13:30 13 - 59 2018-02-03 14:00 44 ************************* 60 2018-02-03 14:30 41 ********************** 61 2018-02-03 15:00 ? - 62 2018-02-03 15:30 29 ********** 63 2018-02-03 16:00 ? - 64 2018-02-03 16:30 38 ******************* 65 2018-02-03 17:00 41 ********************** 66 2018-02-03 17:30 42 *********************** 67 2018-02-03 18:00 40 ********************* 68 2018-02-03 18:30 39 ******************** 69 2018-02-03 19:00 36 ***************** 70 2018-02-03 19:30 36 ***************** 71 2018-02-03 20:00 37 ****************** 72 2018-02-03 20:30 ? - 73 2018-02-03 21:00 29 ********** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 505 --- Lifetime Power-On Resets 0x01 0x010 4 830 --- Power-on Hours 0x01 0x018 6 5178637502 --- Logical Sectors Written 0x01 0x020 6 72067514 --- Number of Write Commands 0x01 0x028 6 9062644027 --- Logical Sectors Read 0x01 0x030 6 88215489 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 9 --- Spindle Motor Power-on Hours 0x03 0x010 4 6 --- Head Flying Hours 0x03 0x018 4 5269 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 206 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 8 --- Resets Between Cmd Acceptance and Completion |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS